Singapore’s Majestic Fast Ferry Pte Ltd has commissioned Incat Crowther to design a new second generation 39-m passenger ferry as the basis of its future fleet. Incat Crowther’s range with PT Cahaya Samudra covers four vessels lengths; 29-, 32-…
Brazil’s Porto Chibatão has taken delivery of four cranes from Liebherr which are now part of a fleet of 16 barge-slewing cranes in operation at the port.The port spans one million square metres. Its static load capacity stands at 40,000 TEUs…
DNV awarded an Approval in Principle (AiP) certificate to China Merchants Jinling Shipyard (Nanjing) Co., Ltd. for its 11,000-CEU capacity pure car and truck carrier (PCTC) design.Recognized as the world's largest PCTC, the 234m long and 40m wide ship will have 14 decks allowing 11…
MITSUI E&S and Liberaware have demonstrated the use of the small industrial drone 'IBIS', specially designed for indoor spaces, to inspect the internal structure of a quayside container crane.Liberaware's small drone IBIS was used to take a…
Victoria International Container Terminal (VICT), Australia’s first fully automated container terminal, will soon be handling the largest container ships to arrive in Australia after the recent delivery of two new ship-to-shore (STS) cranes…
Shipping and energy supply chain firm Crowley has teamed with nuclear power specialist BWX Technologies through a memorandum of understanding for a ship concept that, the companies say, has the potential to generate alternative, zero-carbon…
HydroComp is a well-established, small engineering firm focused on hydrodynamic and propulsion system simulation, providing design tools for engineers and naval architects to focus on vessel performance, including emissions. Don MacPherson, HydroComp’s long-tenured Technical Director…
Kongsberg Maritime will supply design, engineering and equipment for three MGO/Biofuel and methanol-ready tanker ships being built for Danish tanker operator Tärntank. The 15,000-dwt tanker vessels will feature wind assist technology plus Tärntank’s own battery-powered Hybrid Solution…
Liebherr Container Cranes completed its first ship to shore lift height increase with their new patented jacking system as part of Liebherr Transform. The operation was conducted under the supervision of Liebherr engineers at Patrick Terminals – Brisbane Autostrad…
NYK Line and UNI-X NCT Corporation (UNI-X) have begun operation of four state-of-the-art transfer cranes developed by Mitsui E & S Machinery Co., Ltd.The four cranes are based at the NYK Tokyo Container Terminal (NYTT), and each comes equipped…
NYK signed a business alliance agreement with Nakashima Propeller, a marine equipment manufacturer that develops and sells ship propellers as well as energy-saving devices, and Fluid Techno, a ship design company with fluid analysis technology…
Shipbuilder and designer Ulstein is looking to take its revolutionary Thorium powered vessel concept from the drawing board to the deep blue sea. Is this the solution that industry, and society, have been searching for to enable a truly sustainable maritime future…
Lloyd’s Register granted Approval in Principle (AIP) for an SDARI (Shanghai Merchant Ship Design and Research Institute) designed 210,000 DWT Newcastlemax bulk carrier installed with Anemoi Rotor Sails.The Newcastlemax AIP is part of a joint…
SpaceX and ABS signed a joint development project (JDP) to review the remotely controlled functions of autonomous rocket recovery droneships used for booster rocket recovery at sea.The rocket recovery droneships are modified to include an expanded deck to increase the size of the landing platform…
Supply chain management and logistics solutions firm DB Schenker plans to build a fully-electric, zero-emission, un-crewed coastal container feeder to serve the route between Ikornnes quay and the Port of Ålesund in Norway. DB Schenker, and its cooperation partners…